Specifications

Configuring the Switch
2-8
2
CLI – Specify the hostname, location and contact information.
Displaying Switch Hardware/Software Versions
Use the Switch Information page to display hardware/firmware version numbers for
the main board and management software, as well as the power status of the
system.
Field Attributes
Main Board
• Serial Number – The serial number of the switch.
• Number of Ports – Number of built-in RJ-45 ports and expansion ports.
• Hardware Version – Hardware version of the main board.
• Internal Power Status – Displays the status of the internal power supply.
• Redundant Power Status* – Displays the status of the redundant power supply.
* CLI only.
Management Software
• Loader Version – Version number of loader code.
• Boot-ROM Version – Version of Power-On Self-Test (POST) and boot code.
• Operation Code Version – Version number of runtime code.
• Role – Shows that this switch is operating as Master (i.e., operating stand-alone).
Console(config)#hostname Enterasys Matrix-V Series 3-23
Console(config)#snmp-server location TPS - 3rd Floor 3-94
Console(config)#snmp-server contact David 3-93
Console#show system 3-44
System description:
Enterasys Networks, Inc. V2H124-24; SW version: V2.0.1.25
System OID string: 1.3.6.1.4.1.5624.2.1.62
System information
System Up time: 0 days, 4 hours, 40 minutes, and 58.30 seconds
System Name : Enterasys Matrix-V Series
System Location : [NONE]
System Contact : [NONE]
MAC address : 00-30-F1-8A-13-00
Web server : enable
Web server port : 80
Web secure server : enable
Web secure server port : 443
POST result
UART Loopback Test......................PASS
Timer Test..............................PASS
DRAM Test ..............................PASS
I2C Initialization......................PASS
Runtime Image Check ....................PASS
PCI Device Check .......................PASS
Switch Driver Initialization............PASS
Switch Internal Loopback Test...........PASS
------------------- DONE --------------------
Console#