Specifications

Basic Configuration
2-15
2
Web – Click System, Firmware. Enter the IP address of the TFTP server, enter the
file name of the software to download, select a file on the switch to overwrite or
specify a new file name, then click Transfer from Server. To start the new firmware,
reboot the system via the System/Reset menu.
Figure 2-7 Operation Code Image File Transfer
If you download to a new destination file, then select the file from the drop-down box
for the operation code used at startup, and click Apply Changes. To start the new
firmware, reboot the system via the System/Reset menu.
Figure 2-8 Select Start-Up Operation File
CLI – Enter the IP address of the TFTP server, select “config” or “opcode” file type,
then enter the source and destination file names, set the new file to start up the
system, and then restart the switch.
To start the new firmware, enter the “reload” command or reboot the system.
Console#copy tftp file 3-46
TFTP server ip address: 10.1.0.99
Choose file type:
1. config: 2. opcode: <1-2>: 2
Source file name: MCD0121.bix
Destination file name: mcd0121.bix
/
Console#config
Console(config)#boot system opcode: mcd0121.bix 3-50
Console(config)#exit
Console#reload 3-20