Specifications

Basic Configuration
2-17
2
Setting the Startup Configuration File
If you download to a new file name, then select the new file from the drop-down box
for Startup Configuration File, and press Apply Changes. To use the new settings,
reboot the system via the System/Reset menu.
Figure 2-10 Select Start-Up Configuration File
CLI – Enter the IP address of the TFTP server, specify the source file on the server,
set the startup file name on the switch, and then restart the switch.
Copying the Running Configuration to a File
You can copy the running configuration to a file.
Figure 2-11 Copy Running Configuration
CLI – If you copy the running configuration to a file, you can set this file as the
startup file at a later time, and then restart the switch.
Console#copy tftp startup-config 3-46
TFTP server ip address: 192.168.1.19
Source configuration file name: startup2.0
Startup configuration file name [startup] : startup2.0
/
Console#
Console#config
Console(config)#boot system config: startup2.0 3-50
Console(config)#exit
Console#reload
Console#copy running-config file 3-46
destination file name : 051902.cfg/
Console#
Console#config
Console(config)#boot system config: 051902.cfg 3-50
Console(config)#exit
Console#reload 3-20