Specifications

User Authentication
2-35
2
CLI – This example shows the default protocol settings for dot1x. For a description
of the additional entries displayed in the CLI, see “show dot1x” on page 3-64.
Console#show dot1x 3-64
Clobal 802.1X Parameters
system-auth-control: enabled
reauth-enabled: n/a
reauth-period: 3600
quiet-period: 60
tx-period: 30
supp-timeout: 30
server-timeout: 30
reauth-max: 2
max-req: 2
802.1X Port Summary
Port Name Status Mode Authorized
1 disabled ForceAuthorized n/a
2 disabled ForceAuthorized yes
3 disabled ForceAuthorized n/a
4 disabled ForceAuthorized n/a
................................................
23 disabled ForceAuthorized n/a
24 disabled ForceAuthorized n/a
802.1X Port Details
802.1X is disabled on port 1
.
.
.
802.1X is enabled on port 24
Status Unauthorized
Operation mode Single-Host
Max count 5
Port-control Auto
Supplicant 00-00-00-00-00-00
Current Identifier 0
Authenticator State Machine
State Connecting
Reauth Count 3
Backend State Machine
State Idle
Request Count 0
Identifier(Server) 0
Reauthentication State Machine
State Initialize
Console#