Specifications

Status Information
4-90 Advanced Configuration
Using Web Management to View Event Logs
TheEventLogswindowshowsthelogmessagesgeneratedbytheaccesspointandstoredin
memory.
TheEventLogstabledisplaysthefollowinginformation:
• LogTimeisthetimethelogmessagewasgenerated.
• EventLevelisthelogginglevelassociatedwiththismessage.Foradescriptionofthevarious

levels,referto“LoggingLevelDescriptions”onpage4‐43.
•EventMessageisthecontentofthelogmessage.
•ErrorMessages.Anexampleofaloggederrormessageis:
“Station Failed to authenticate (unsupported algorithm).”
Thismessagemaybecausedbyanyofthefollowingconditions:
–TheAccesspointwassetto“OpenAuthentication,”butaclientsentanauthentication
requestframewitha“Sharedkey.”
–TheAccesspointwassetto“SharedKeyAuthentication,”butaclientsentan
authenticationframefor“OpenSystem.”
–TheWEP
keysdonotmatch:Whentheaccesspointuses“SharedKeyAuthentication,”
butthekeyusedbyclientandaccesspointarenotthesame,theframewillbedecrypted
incorrectly,usingthewrongalgorithmandsequencenumber.