Specifications

Command Groups
A-66
snmp-server engine-id
ThiscommandisusedforSNMPv3.Itisusedtouniquelyidentifytheaccesspointamongall
accesspointsinthenetwork.UsethenoformtodeletetheengineID.
Syntax
snmp-server engine-id <engine-id>
no snmp-server engine-id
engine‐id‐Entertheengine‐idinhexadecimal(5‐32characters).
Default Setting
Enabled
Command Mode
GlobalConfiguration
Command Usage
•Thiscommandisusedinconjunctionwiththesnmp‐serverusercommand.
•EnteringthiscommandinvalidatesallengineIDsthathavebeenpreviouslyconfigured.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#snmp-server engine-id 1a:2b:3c:4d:00:ff
RoamAbout 3000(config)#