Specifications

Command Groups
A-84
radius-server port-accounting
ThiscommandenablesordisablestheRADIUSserverportforaccountingpacketsandsetsthe
portnumber.
Syntax
radius-server port-accounting <port_number> | <enable | disable>
•port_numberistheRADIUSserverUDPportusedforaccountingpackets.
Range:0(disabled),1024‐65535
•<enable|disable>enablesordisablestheuseoftheaccountingport
Default Setting
Portnumber:1813
Disable
Command Mode
GlobalConfiguration
Example
radius-server retransmit
Thiscommandsetsthenumberofretries.
Syntax
radius-server [secondary] retransmit number_of_retries
•secondaryisthesecondaryserver.
•number_of_retriesisthenumberoftimestheaccesspointwilltrytoauthenticatelogon
accessviatheRADIUSserver.Range:1‐30
Default Setting
3
Command Mode
GlobalConfiguration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#radius-server port-accounting 1813
RoamAbout 3000(config)#radius-server port-accounting enable
RoamAbout 3000(config)#
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#radius-server retransmit 5
RoamAbout 3000(config)#