Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-159
rogue-ap enable
ThiscommandenablesrogueAPonthe802.11aor802.11ginterfaces.Usethenoversionofthis
commandtodisabletherogueAPfeature.
Syntax
rogue-ap [interface-a | interface-g] enable
no rogue-ap [interface-a | interface-g]
Default Setting
None
Command Mode
GlobalConfiguration
Command Usage
N/A
Example
Related Commands
N/A
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#rogue-ap interface-a enable
configure either syslog or trap or both to receive the rogue APs
detected.