Installation guide

Preparing for Installation 1-5
Unpacking and Inspecting
Access Point
Verify that the following components shipped with your Access Point:
* Only use UL Listed Class 2 power supplies with this product.
PC Card
The Access Point 2000 supports the RoamAbout 802.11b PC Cards, and their variants. To
determine which PC Card is needed for your configuration, refer to the RoamAbout 802.11
Certification and Regulatory Information document for 802.11b PC Cards. This document
is available on the Enterasys Networks web site at: www.enterasys.com/wireless
The RoamAbout PC Cards are sold separately. Contact your Enterasys sales representative
for more information.
# Description Part Number
1, 2 RoamAbout Access Point 2000
(with wall/ceiling mounting bracket)
CSIWS-A
3 Plastic Cover
NOTE: A security box, sold separately, is
available. Contact your Enterasys
Representative for more information.
8520216-01
4 Power Supply (100-240 VAC) 5652054-XX
5 International connector kit for the Power
Supply (100-240 VAC)
(not necessary for North American
installations) (
5601013-Kit
6 Remote Power Injector 8917544-05
7 Four Rubber Feet 5020005