Specifications

PIM Commands
XSR CLI Reference Guide 7-89
PIM Commands
ip pim sparse-mode
ThiscommandenablesProtocolIndependentMulticast(PIM)SparseMode(SM)onalocal
interface.
Syntax
ip pim sparse-mode
Syntax of the “no” Form
ThenoformofthiscommanddisablesPIMonaninterface:
no ip pim sparse-mod
Mode
Interfaceconfiguration:XSR(config-if<xx>)#
Default
PIM‐SMisdisabledonaninterface
Example
ThefollowingexampleenablesPIMsparsemodeonF1:
XSR(config-if<F1>)#ip pim sparse-mode
ip pim bsr-border
ThiscommandspecifiesaninterfacesoBootStrapRouter(BSR)messagesarenotsentorreceived
throughaninterface.
Syntax
ip pim bsr-border
Syntax of the “no” Form
ThenoformofthiscommandremovestheBSRbordersetting:
no ip pim bsr-border
Mode
Interfaceconfiguration:XSR(config-if<xx>)#