User's Manual

02 | CHAPTER. 02
Chapter.02 - How to Set up Your MAGICSING
CHAPTER. 02 | 01
How to Set up Your MAGICSING - Chapter.02
HOW TO CONNECT TO A TVHOW TO CONNECT TO A TV
ET21KV Main StationET21KV Main Station
1. Connect the Audio / Video cable to the RCA jack terminal on your TV,
as shown above. If there are only two RCA jack terminals on your TV
(mono TV), connect the yellow jack (male) to the yellow RCA jack terminal
and connect the white jack (male) to the other RCA jack terminal of your TV.
1. Connect the Audio / Video cable to the RCA jack terminal on your TV,
as shown above. If there are only two RCA jack terminals on your TV
(mono TV), connect the yellow jack (male) to the yellow RCA jack terminal
and connect the white jack (male) to the other RCA jack terminal of your TV.
※Please turn off the function “Automatic Volume Levelling” (AVL / AVC) on
your television set.
※Please turn off the function “Automatic Volume Levelling” (AVL / AVC) on
your television set.
1. Connect the yellow jack to the yellow RCA terminal on your TV. Connect
the red and white jack to jack terminals on your stereo (sound system).
You might need an extension cable if your stereo (sound system)
is placed
- far away from your TV.
1. Connect the yellow jack to the yellow RCA terminal on your TV. Connect
the red and white jack to jack terminals on your stereo (sound system).
You might need an extension cable if your stereo (sound system)
is placed
- far away from your TV.
HOW TO CONNECT TO A TV & STEREO
(SOUND SYSTEM)
HOW TO CONNECT TO A TV & STEREO
(SOUND SYSTEM)
Stereo ( Sound System )Stereo ( Sound System )
TelevisionTelevision
TelevisionTelevision
EXT. VIDEO OUTEXT. VIDEO OUT
VIDEO IN | VIDEO OUTVIDEO IN | VIDEO OUT
HOW TO CHANGE THE BACKGROUND VIDEO
USING OTHER VIDEO SOURCES
HOW TO CHANGE THE BACKGROUND VIDEO
USING OTHER VIDEO SOURCES
1. Connect the video cable to the VIDEO OUT jack terminal on other optional
video sources
(
VCD, DVD,VIDEO
)
.
2. Connect the other side of the video cable to the VIDEO IN jack terminal of
MAGICSING.
3. Press
[
MODE + 0
]
on the mic or on the remote control to use other video
sources as background by setting "EXT.VIDEO INPUT" on the “configuration
menu”.
1. Connect the video cable to the VIDEO OUT jack terminal on other optional
video sources
(
VCD, DVD,VIDEO
)
.
2. Connect the other side of the video cable to the VIDEO IN jack terminal of
MAGICSING.
3. Press
[
MODE + 0
]
on the mic or on the remote control to use other video
sources as background by setting "EXT.VIDEO INPUT" on the “configuration
menu”.
1. To convert to PAL mode, turn off the mic first.
Press and hold button [8] on the mic, and then press the
[
POWER
]
button
using another finger until the word “PAL” appears on the TV screen.
(Do not release button [8] and the
[
POWER
]
button until the word “PAL”
appears on the TV screen.)
2.
To convert to NTSC mode, turn off the mic first.
Press and hold button [9] on the mic, and then press the
[
POWER
]
button using
another finger until the word “NTSC” appears on the TV screen.
(Do not release button [9] and the
[
POWER
]
button until the word “NTSC” appears
on the TV screen.)
HOW TO CONVERT
[
PAL
]
OR
[
NTSC
]
MODE OF TV
ET21KV Main StationET21KV Main Station
AUDIO L / R & VIDEO OUTAUDIO L / R & VIDEO OUT
INPUT PORT I AUDIO L / R & VIDEO ININPUT PORT I AUDIO L / R & VIDEO IN
AUDIO CABLE (RCA)AUDIO CABLE (RCA)
VER.100 VER.100