User's Manual

WIRELESS SUB-MICROPHONE USER MANUAL (OPTION)
1. Open the back cover, then plug the receiving pack as the diagram shown above
2. When pressing the Function Change + 3 button of the Main Microphone, the monitor will display the
Sub-Microphone ON, and it will begin to function the channel.
3. Open the back cover of the Sub-Microphone, insert two AA batteries and press the power button.
The Green LED light will be on and, it will start to function.
 When you insert the batteries, make sure the + - is pointed in the right direction.
4.
 / Button
It is used to select the songs. As you press the button, the monitor will show 10
songs list.
By pressing the button up and down, you can choose the desired song, then press the
START button to play.
When you press the button during the operation, it will show each song on the list.
5.
RES
Reservation Button
Select the desired dong number, and then press the Reservation Button.
6.
 
Hold
During the performance, pressing the HOLD button will temporarily stop the music, pressing it again
will resume the performance.
7. PWR
Power Button
It is used to turn the Power ON for the Sub-Microphone.
8.


PLAY/STOP
It is a start/stop button. It will start to play when you press it, and it will stop when you press it again.
 When the Red LED light appears the batteries need to be replaced.
 If you want to stop using the sub microphone, press the Function Change + 3.
The monitor will show the sub-microphone OFF sign, and it will stop the play.
3. Χλοσε τηε βινδερ ρινγ.