RX01-CC85A Manual
Product Overview 1. Overview • Wireless Receiver Module with TI CC8530 2. Specifications 사용 주파수 ① Transmission : 2406~2474MHz ② Reception : 2406~2474MHz ③ RF Power: 0.003 W/MHz • Power: DC 5 V • External Communication : UART 1CH. • Audio CH: I2S 1CH.
Communication Interface • UART Protocol 1) UART Interface Baudrate : 9600BPS Data : 8bit Parity : None 2) Data framing 0xF3: 0xF6: 0xD6: 0xE0: Mic ON/OFF Mic1 Volume Mic2 Volume Mic Link Info
Approval Information 1 KCC 2 FCC compliance Information FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Including interference that may cause undesired operation. Modifications not expressly approved by the manufacturer could void the user’s authority To operated the equipment under FCC rules.
This device is intended only for OEM integrators under the following conditions: 1)The transmitter module may not be co-located with any other transmitter or antenna, 2)OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 2 conditions above are met, further transmitter test will not be required.