User's Manual

ManualsBrandsEnterprise Electronics ManualsElectronicsMulti-Mode Radar System

CHAPTER 8 INTERFACE CONTROL DOCUMENTS (ICD)

APPENDIX A INTERFACE CONTROL DOCUMENTS (ICD)

ISSUE/REVISION DATE: 25 JULY 2007 TECHNICAL MANUAL

ISO 9001:2000 PROPRIETARY

Interface Control Document (ICD) ENTERPRISE ELECTRONICS CORPORATION

Rev No. 5 Page 21 of 21

Issue Date 25 July 2007 UM-130365

Distribution Data Collection

Module (DDC)

THE DATA PRESENTED HEREIN REPRESENTS THE INTELLECTUAL PROPERTY OF ENTERPRISE ELECTRONICS CORPORATION (EEC). THIS DATA MAY NOT BE DISTRIBUTED OR REPRODUCED BY

ANY MEANS WITHOUT THE EXPRESS, WRITTEN CONSENT OF EEC.

Personality Configuration

Once the DDC software has been downloaded to the device it is necessary to configure the DDC’s per-

sonality by running the setup command from the DDC’s command line interface on COM0 or via telnet.

SETUP

After selecting the correct configuration options for your module it is necessary to reset the module by

issuing the reset command. The DDC will now reboot and run you selected configuration.