User's Manual

Locks and Security
Replacement of the battery will not cause the keypad to become
deprogrammed from your vehicle. The keypad should operate
normally after battery replacement.
Replacing stolen/damaged keyless entry keypad
If a the keyless entry keypad has been stolen or damaged, or if you
would like to purchase an additional keypad for your passengers
door and have it programmed to your vehicle:
• Take your vehicle as well as all your keyfob remote
transmitters to your dealer, or
• Perform the programming procedure yourself
Programming keyless entry keypads
It is necessary to have all (maximum of four – original and/or new)
keypads and remote transmitters available prior to beginning this
procedure.
To program the keyless entry keypad yourself:
3
4
5
2
1
3
4
5
2
1
• Place the key in the ignition and
turn from 2 (LOCK) to 3 (OFF) and
cycle between 3 (OFF) and 4 (ON)
eight times in rapid succession (within
10 seconds) with the eighth turn
ending in the 4 (ON) position. The
doors will lock/unlock to confirm that
programming mode has been entered.
• Within 20 seconds, program the keyless entry keypad by
entering in the factory-set or personal code (if already programmed
into keypad). The doors will lock/unlock to confirm that the
keypad has been programmed. (If more than 20 seconds pass