User manual

4. After you made the desired setting changes, click on the UPDATE button. To install the
settings that you made, click on the “Save Changes” button. The EMG will reset and your
new settings will be activated.
3. Firmware Updates
If there are necessary updates or new additions to the EMG firmware, you can install them to
the device using the USB port. The latest version of the firmware can be downloaded from
http://www.entes.com.tr. Because the firmware update deletes the read-only memory(ROM)
of the device and the installs the new firmware in this memory, your previous settings will be
deleted and replaced with the factory default settings. The file to be installed will be
EMG10v.x_x_x.rom or EMG12vx_x_x.rom. v.x_x_x stands for the version information.
For the update to be successful, the firmware version of the device and EMG Configuration
Tool version must be compatible. Otherwise, a successful firmware update will be out of the
question.
1. To update the device firmware, click on the Firmware Update tab on the EMG
Configuration Tool.