Manual

9
LED Indicator and GUI design
Key Functions
Phase 1 / 2 / 3 LEDs
It informs you that voltage is taken from the phases. (e.g. LED L1 lights up if voltage is being taken from phase L1.)
VLN Measurement LED
It lights up when the screen showing phase-neutral voltages is on
VLL Measurement LED
It lights up when the screen showing phase-phase voltages is on
Current Measurement LED
It lights up when the screen showing phase currents is on
PF LED
PF
It lights up when the screen is on
cosj Measurement LED
It lights up when the screen showing phase cosф is on
Active Power Measure LEDs
It lights up when the screen showing active power is on.
Reactive Power Measure LED
It lights up when the screen showing reactive power is on.
Apparent Power Measure LED
It lights up when the screen showing apparent power is on.
Energy
It lights up when energy is shown.
Harmonic Measurement LED HAR It lights up when the screen showing harmonic values is on.
THD Measure LED
It lights up when the screen showing THD values is on.
Digital Input 1 LED
It lights up when it gets pulse or digital control input command.
Digital Input 2 LED
It lights up when it gets pulse or digital control input command.
It lights up when there is a phase sequence error.
Latch Symbol
It lights up when the alarm is activated and continues to light up until you press and hold the 3rd-second key after the
alarm is deactivated
Unit Symbol
Percentage Symbol
Indicates the percentage symbol.
Second Symbol
Indicates the Second Symbol
Total Symbol
Indicates the Total Symbol
Language Navigation LED
It lights up when the screen where the menu and display language of the device can be set is on
Frequency Symbol
Hz
Indicates the Frequency Symbol
Hour Unit Symbol
h
Indicates the Hour Unit Symbol
Maximum Symbol
MAX
Indicates the Maximum Symbol
Minimum Symbol
MIN
Indicates the Minimum Symbol
Demand Symbol
DMD
Indicates the Demand Symbol
Weight Unit Symbol
k
Indicates the Weight Unit Symbol
Lock Navigation LED
It lights when the main setting screen of the password protection values is on
Network Navigation LED
It lights up when the screen where the network settings of the meter are completed is on
Transformer Navigation LED
It lights up when the screen with voltage transformer and current transformer master view and settings is on
Communication Navigation LED
It lights up when the screen where the Modbus Communication settings are displayed and changed is on
Input Output (I/O) LED
The input on the LED device lights up while the output settings are being made.
Alarm Navigation LED
It lights up when the main screen to access alarm settings is open
Reset Navigation LED
It lights up when the setting screen where Min, Max, Demand values are deleted is on
Info Navigation LED
It lights up when the menu for displaying information such as software, hardware versions, serial number, date,time of
the device is on
Relay 1 Output LED
It lights up when the relay output is active
Relay 2 Output LED
It lights up when the relay output is active
Digital Output 1 LED
It lights up when it sends a pulse or digital output control command
Digital Output 2 LED
It lights up when it sends a pulse or digital output control command