User manual

17
18
2.1.3. ESCAPE Menu
It is used to exit from the main menu. An approval is asked to save any changes that has been made in
the main menus. If no change has been made, monitoring menu is displayed directly.
2.2. Settings that are changed from the PC
2.2.1. RS-485 Settings
You can change RS-485 settings that you can change from the device such as Baud Rate, Parity and
Address by using the configuration software. When you change EPC-12 RS-485 settings, communication
between device and PC will be disconnected. You can establish communications by setting the RS-485
Settings of the device and PC the same and you can continue to adjust settings from the PC.
BAUD RATE: PARITY:
0 = 1200 bps 0 = No
1 = 2400 bps 1 = Odd
2 = 4800 bps 2 = Even
3 = 9600 bps
4 = 19200 bps
5 = 38400 bps
ADDRESS
RS-485
SETTINGS
ADDRESS
(HEX)
REGISTER R/W RANGE
FORMAT
32768
32770
32769
8000
8002
8001
BAUD RATE
PARITY
COMMUNICATION ADDRESS
R/W
R/W
R/W
0-5
0-2
1-247
unsigned int
unsigned int
unsigned int
Save
No
Save
Yes
Monitoring
Screen
Saved!
Commited change is
not saved!
ESCAPE
Commited change is
saved!