User manual

5
6
6) Activating password protection and defining a new password,
7) Changing the log save period,
8) Activating DST(Daylight Savings Time),
9) Holiday, saturday, sunday and week day tariffs can be programmed (8 for each)*,
10) Monitoring counters with tariff and total counters,
11) Resetting counters with tariff and total counters,
12) Assigning index to counters with tariff when Counter Set from device menu is activated,
13) Monitoring date and time, tariff, next record number to be written and alarm states at that time,
* A tariff between 1 and 8 can be selected but a selected tariff (for example T1) can be selected more
than one time as long as its time range doesn't overlap with another tariff.
1.3. FRONT PANEL
1.4. HARDWARE FEATURES
1) Pulse and Com Inputs (12 pin Pulse Inputs, 4 pin Com Input)
2) Supply Input (2 pin)
3) RS-485 terminals (4 pin)
1) Up and Down Button : It is used to display total counter indexes of 12 pulse inputs, date and time
information and alarm states on the monitoring screen. While in the menu screen, they are used to
browse between menu items and to increase/decrease a numerical value.
2) Set button : It is used to enter the menu screen when pressed for 3 seconds. It is used to enter a
sub-menu or upper-menu, to exit from a menu, to switch the indicator to the right while entering a
numerical value and to save the committed change.
3) Count (C) : It indicates which pulse input's total counter index is displayed at that moment.
4) Tariff Information (T) : It indicates which tariff is active at that moment. If there is a tariff overlap or the
clock is faulty, pulses at that moment are saved to T1 tariff and a cautionary flashing will occur on the
tariff display. In that case, the user will be informed of the problem's cause in the Alarm section of
display (For Example; Wrong Time, No Tariff, etc.). Additionally, the problem can be monitored by
using the Alarm section on the Configuration Software.
5) Unit : It indicates the unit of the index counted by pulse input displayed at that moment.
6) Total Counter Index : It is the total counter index of the pulse input displayed at that moment. It can
have a maximum value of 34.359.738.360 (8x2word). Total counters consist of the summation of 8
counters with tariff. Each counter with tariff has a capacity of 2 word which means it can have a
maximum value of 4.294.967.295. Each counter with tariff that fills its 2 word capacity is reset to zero
automatically and continues to count.
7) Pulse LEDs : It is for indicating an incoming pulse to the associated pulse input by flashing.
8) 2x12 characters LCD screen.
9) Backlight