User manual

7
8
2. UTILIZATION OF DEVICE
For security reasons, only a portion of the settings are permitted to be changed directly from the device.
Therefore, device settings will be explained under two headlines as Changed from the Device and
Changed via Modbus protocol using PC.
2.1. Settings that are changed from the device
After you connected the device as described in the connection diagram, energize the device. In order
for your measurements and applications to be accurate, make the necessary adjustments by using the
menus.
Monitoring Screen
The display changes automatically in 5 second intervals on the monitoring screen. You can also browse
between displays by using up and down buttons. Total counter indexes, tariffs and unit information of all
counters from 1st to 12th, clock, date and alarm information is displayed on this screen and after alarm
display, it shows the 1st counter again.
Count 1 Tariff Unit
Total Counter Indexes
Time
hour:minute:second
Date
Day/month/Year
Count 2 Tariff Unit
Total Counter Indexes
Count 3 Tariff Unit
Total Counter Indexes
Count 4 Tariff Unit
Total Counter Indexes
Count 5 Tariff Unit
Total Counter Indexes
Count 6 Tariff Unit
Total Counter Indexes
Count 7 Tariff Unit
Total Counter Indexes
Count 8 Tariff Unit
Total Counter Indexes
Count 12 Tariff Unit
Total Counter Indexes
Count 11 Tariff Unit
Total Counter Indexes
Count 9 Tariff Unit
Total Counter Indexes
Count 10 Tariff Unit
Total Counter Indexes
Alarm!