Instructions

38
2. The chosen Time Zone is displayed on the screen.
3. Enter the menu by pushing the SET button.
4. You can determine the time zone of the desired region in half hours by using the down and up
arrow buttons.
5. Push the SET button after completing your selections.
6. Do not forget to save the adjusted settings before leaving the menu by means of the BACK
button.
Summer Time Mode Setting
1. Push the SET button while you are on the Summer Time mode screen.
2. The Summer Time screen is displayed.
3. Select one of the EUROPE, USA, Special Settings and Closed setting by pushing the SET
button.
4. If, you choose the Special Setting mode, the beginning month, week, day and time of the
Summer Time are adjusted by pushing the SET button.
5. If, the SET button is pushed again, the ending month, week, day and time of the Summer Time
are adjusted by pushing the SET button.
6. After, the desired values are adjusted, please push the SET button and leave this menu.
7. Do not forget to save the adjusted settings before leaving the menu by means of the BACK
button.
RS-485 Communication Settings
RS-485 Address Setting
1. Come to the Address menu in RS-485 settings and push the SET button.
2. The current address flashes. The address where the device is located on the RS-485 network
can be chosen in 1 to 247 range. You can adjust any value for each digit in the address menu by
means of the SET button.
3. Do not forget to save the adjusted settings before leaving the menu by means of the BACK
button.