Instructions

39
RS-485 Bit Rate Setting
The RS-485 communication rate of the device can be adjusted one of the following values:
1. 2400 baud
2. 4800 baud
3. 9600 baud
4. 19200 baud
5. 38400 baud
6. 57600 baud
7. 115200 baud
1. For this process, please push the SET button while you are in the RS-485 bit rate menu.
2. Switch to the selection phase by means of the SET button while you are on the displayed
selection screen.
3. Adjust the desired value by using the down and up arrow buttons.
4. Do not forget to save your settings before leaving the menu by means of the BACK button.
RS-485 Parity Setting
The RS-485 communication parity of the device can be set to one of the values as ODD or EVEN
parity or without any parity.
The factory default value is NO Parity.
1. For this process, please push the SET button while you are in the RS-485 Parity menu.
2. Switch to the selection phase by means of the SET button while you are on the displayed
selection screen.
3. Adjust the desired value by using the down and up arrow buttons.
4. Do not forget to save your settings before leaving the menu by means of the BACK button.