Instructions

40
Input Parameter Settings
One of the following values can be selected for the input type of the device.
1. Digital input: If, this type is selected, the device senses the logic level of the input.
2. Generator input: If, this type is selected, the device can apply the energy registry to the
generator registers according to the input data.
1. For this process, please push the SET button while you are in the Input menu.
2. Switch to the selection phase by means of the SET button while you are on the displayed
selection screen.
3. Adjust the desired value by using the down and up arrow buttons.
4. Do not forget to save your settings before leaving the menu by means of the BACK button.
Output Parameter Settings
The digital output of the device can be used for one of the following values:
1. Output according to the pulse selection. In this option, the device generates output pulses
according to the selected size of the active and reactive energy.
2. Output according to the alarm. In this option, if the parameter set as the alarm source exceeds
the threshold level, the device output is automatically changed from logic-1 level to the logic-0
level.
When, the alarm condition disappears, the device turns into the logic-1 level.