Instructions

41
3. Output according to the remote selection. In this option, the user can set the output of the device
as logic-0 or logic-1 in accordance with the RS-485 protocol.
By this way, the user can remotely turn on/off any circuit.
1. For this process, please push the SET button while you are in the Output menu.
2. Switch to the selection phase by means of the SET button while you are on the displayed
selection screen.
3. Adjust the desired value by using the down and up arrow buttons.
4. Do not forget to save your settings before leaving the menu by means of the BACK button.
Pulse Output Settings
Pulse output according to Active Energy
1. Push the up arrow button while the PuLS O-1 PArA is selected on the screen.
2. Choose the energy value which the device generates an output pulse as indicated in the screens
above. Choose the one on left for total import and the one on right for total export active energy.
3. Exit from the menu after completing your selection.
4. Do not forget to save your settings before leaving the menu by means of the BACK button.
After, the output according to the pulse selection is chosen from the parameter settings, the pulse output
setting according to active energy can be adjusted.
The device can generate pulses as much as the following steps of the import or export active energy:
1. 1 Wh