Instructions

42
2. 10 Wh
3. 100 Wh
4. 1 kWh
5. 10 kWh
6. 100 kWh
7. 1 MWh.
Pulse output according to Reactive Energy
1. Push the SET button while the PuLS O-1 PArA is selected on the screen.
2. Choose the energy value according to the desired section which the device generates an output
pulse as indicated in the screens above.
3. Exit from the menu after completing your selection.
4. Do not forget to save your settings before leaving the menu by means of the BACK button.
As it is seen from the figures, the energy regions can be selected for different quadrant sections.
The device can generate pulses as much as the following steps of the import or export reactive energy:
1. 1 Varh
2. 10 Varh
3. 100 Varh
4. 1 kVarh
5. 10 kVarh
6. 100 kVarh.
7. 1 MVarh
Time Setting for Pulse Output
In this section, the time that the pulse will stay at the logic-0 level is set.