Instructions

44
1. Push the SET button while the HoUr CoUn PArA is selected on the screen.
2. Select the parameter where the time counter will start.
3. Switch to the next setting by the SET button after making your choice.
Then, the level which this selected parameter will start the time counter is exceeded is determined.
1. As it is seen above, while the level screen of the selected parameter is chosen, push the SET
button.
2. Enter the appropriate level value digit by digit. You can switch between the digits by means of
the SET button.
3. Exit from the menu after completing your selection.
4. Do not forget to save your settings before leaving the menu by means of the BACK button.
Alarm Settings
The parameters of 4 different alarms of the device can be adjusted separately.
The processes described for an alarm in the following section are the same for all 4 alarms.
Activating the Alarm
Follow the following steps for activating an alarm:
1. Push SET while your are in the Setup Alarm menu.