Instructions

45
2. If, SET button is pushed while, you are in the Alarm Enable screen, you can select it as enable
or disable by the down and up arrow buttons.
3. Push the SET button after making your choice.
4. Do not forget to save your settings before leaving the menu by means of the BACK button.
Selecting Alarm Parameters
Follow the steps below for selecting alarm parameters:
1. Push SET while your are in the Setup Alarm menu.
2. Switch to the Alarm parameters screen by pushing the down button.
3. Activate an alarm parameter by pushing the SET button.
4. Set the alarm parameter one of the following options by means of the down and up arrow
buttons:
a. Phase currents
b. Total current
c. Current demand
d. Total current demand
e. Active Power
f. Reactive Power
g. Apparent Power
h. Total Active Power
i. Total Reactive Power
j. Total Apparent Power
k. Active power demand
l. Apparent power demand
m. Total Active Power Demand
n. Total Apparent Power Demand
o. Cos phi
p. Total Cos phi
q. Frequency
r. THDV
s. THDU
t. THDI
u. Time counter
v. Digital input
w. Tariffs
x. Phase Neutral Voltage
y. Phase to Phase Voltage
5. Push the SET button after completing your selections.