Instructions

46
Alarm Operating Method Settings
1. Push the SET button for selecting the alarm operation method.
2. In this mode, select one of the following options:
a. In the window
b. Out of the window
c. Greater than the value
d. Smaller than the value
3. When, in and out of the window are selected, the low and high threshold levels are set.
4. The high threshold level is set for the greater than value option while the low threshold level is
set for smaller than the value option is selected.
5. Do not forget to save your settings before leaving the menu by means of the BACK button.
Alarm High Level Setting
In this mode, the high level value required for defining an alarm is set.
1. While Alarm Enable is chosen, Alarm High screen can be seen by pushing the up arrow button.
2. Set the desired high level value by using the SET button and the direction buttons.
3. Push the SET button after completing your selections.
4. You can save alarm parameters separately for 4 different alarms.
5. Do not forget to save your settings before leaving the menu by means of the BACK button.
Alarm Low Level Setting
In this mode, the low level value required for defining an alarm is set.
1. While, the Alarm Enable is chosen, switch to the Alarm Low screen by pushing the up arrow
button.
2. Set the desired low level value by using the SET button and the direction buttons.
3. Push the SET button after completing your selections.