Instructions

50
Resetting the time counter
1. Select "Time Counter" logs from the Reset menu and push the SET button.
2. Select the "Yes" option for deleting by using the down and up arrow buttons in the "Reset Time
Counter" section shown on the screen.
3. Finalize your input by the SET button.
4. Do not forget to save your settings before leaving the menu by means of the BACK button.
System Settings
Pin Code Activation
It is set whether a password is required for accessing the settings menu by the settings to be applied
in that section.
1. Push the SET button in the "Pin Request" screen of the system menu.
2. If, the SET button is pushed in the "Request PinA" section displayed on the screen, the 4-digit
PIN input screen is displayed.
3. Enter your set PIN code by using the down and up arrow buttons.
4. You can switch between the digits by pushing the SET button.
5. When, you enter the correct Pin code, the "Active" and "Passive" options are displayed on the
screen.
6. If, you save by exiting the menu after choosing the "active" option, the following menu access will
be through a password authentication.
7. Do not forget to save your settings before leaving the menu by means of the BACK button.
Factory default device menu password is 1234.
Changing the Pin Code