Instructions

Terminal Structure

1) 185 - 300 VAC/VDC Supply Input 3 terminal connections (2 pins)

2) Current measuring input terminal block (6 pins): L1 L2 L3 ve N

3) Voltage measuring input terminal block (4 pins): L1 L2 L3 and N

4) RS-485 terminal block (2 pins)

5) Digital Input/Output terminal (4 pins)

INSTALLATION

The device has shunts for current measurement element there for it must be used with external current

transformers.If the device will be use with other analysers on the same panel ,it is recommented that the

device will be the last point on the current measurement line.

Device has 5 different connection configurations. These configurations are explained with diagrams

below:

3P4W (3 Phase with Neutral) Connection

For this configuration, four voltage connections (including neutral line) and three current connections are

used. Voltage inputs should be connected with 100 mA fuses as shown below.