Instructions

32
The date of the device’s RTC module can be set in hours, minutes and seconds.
To set the date, follow these steps:
1. Press the SET button on the Date Set screen.
2. Press the SET button. Adjust the day with UP/DOWN buttons.
3. Press the SET button. Adjust the month with UP/DOWN buttons.
4. Press the SET button. Adjust the year with UP/DOWN buttons.
5. When exiting from the menu with the BACK button, don’t forget to save the changes.
Time Zone Setting
1. Press the SET button while “Clock Time Zone” is displayed.
2. Selected Time Zone screen is displayed.
3. Enter the menu by pressing the SET button.
4. Select your time zone in 30 minutes increments by using UP/DOWN buttons.
5. Press the SET button after you’re finished with selection.
6. When exiting from the menu with the BACK button, don’t forget to save the changes.
DST Mode Setting
1. Press the SET button while Clock DST Mode screen is displayed.
2. Daylight Save screen is displayed.
3. Press the SET button and select one of EUROPE, USA, MANUEL and DISABLE options.
4. If you select MANUEL option; you will have to enter month, week, day and hour for the start of
DST in that order.
5. After finishing the DST Start settings; you will have to enter month, week, day and hour for the
end of DST in that order.
6. After selecting your DST setting, press the SET menu and exit from this menu.
7. When exiting from the menu with the BACK button, don’t forget to save the changes.