Instructions

33
RS-485 Communication Settings
RS-485 Address Setting
1. Select Address option under Settings/RS-485 and press SET button.
2. Current address option will start blinking. You can browse between digits with SET and BACK
buttons. Select an address between 1 and 247 and press SET button.
3. When exiting from the menu with the BACK button, don’t forget to save the changes.
RS-485 Baudrate Setting
RS-485 communication speed of the device can be set to one of the following options:
1. 2400 baud
2. 4800 baud
3. 9600 baud
4. 19200 baud
5. 38400 baud
6. 57600 baud
7. 115200 baud
1. Press the SET button while on RS-485 baud rate screen.
2. Press the SET button to start selecting the baudrate value.
3. Select your communication speed by using UP/DOWN buttons.
4. When exiting from the menu with the BACK button, don’t forget to save the changes.