Instructions

37
Output is selected, the device can create pulses for import or export reactive energy according to the
increments listed below.
Reactive energy values from Q1, Q2, Q3 and Q4 quadrants can be used as source.
1 VArh
10 VArh
100 VArh
1 kVArh
10 kVArh
100 kVArh.
1 MVArh
Pulse Output Duration Setting
The duration during the pulse stays at logic-1 level is entered here.
1. Press SET button while PULS DURATION is displayed.
2. Enter the duration in seconds with 0.01 second increments with UP/DOWN buttons.
3. Exit from the menu when selection is complete.
4. When exiting from the menu with the BACK button, don’t forget to save the changes.
Pulse Output Inactive Time Setting
The duration during the pulse stays at logic-0 level is entered here.
1. Press SET button while PULSE DUTY is displayed.
2. Enter the inactive time in seconds with 0.01 second increments with UP/DOWN buttons.
3. Exit from the menu when selection is complete.
4. When exiting from the menu with the BACK button, don’t forget to save the changes.