Instructions

41
5. When exiting from the menu with the BACK button, don’t forget to save the changes.
Low Alarm Limit Setting
A low limit for the alarm is entered in this menu.
1. While Alarm Enable is selected, find Alarm Low menu with UP/DOWN buttons.
2. Press the SET button. Enter the low alarm limit with UP/DOWN buttons.
3. Press the SET button after completing your selection.
4. Alarm parameters can be saved for 4 different alarms separately.
5. When exiting from the menu with the BACK button, don’t forget to save the changes.
Alarm Hysteresis Setting
A hysteresis value for the alarm is entered in this menu.
1. While Alarm Enable is selected, find Alarm Hyst menu with UP/DOWN buttons.
2. Press the SET button. Enter the hysteresis value for the alarm as % with UP/DOWN buttons.
3. Press the SET button after completing your selection.
4. Alarm parameters can be saved for 4 different alarms separately.
5. When exiting from the menu with the BACK button, don’t forget to save the changes.
Alarm Delay Times Setting
1. After entering a hysteresis value, press the UP button to find the Alarm On Delay menu.
2. Press the SET button. Enter the alarm ON delay value in seconds for the alarm UP/DOWN
buttons. Go to the next digit with SET button. When the alarm conditions occur on the system,
the alarm will be activated after the entered time passes.