Instructions

Standard
Year
Title
IEC 61557-12
2008
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c.
- Equipment for testing, measuring or monitoring of protective measures - Part 12:
Performance measuring and monitoring devices
IEC 61326-1
2005
Electrical equipment for measurement, control and laboratory use - EMC
requirements - Part 1: General requirements
EN 61000-6-2
2005
Generic immunity standard: Industrial environment
IEC 60050(161)
2011
International Electrotechnical Vocabulary Chapter 161- Electromagnetic Compatibility
EN 62053-21
2003
Electricity metering equipment (a.c) – Particular requirements - Part 21: Static meters
for active energy (Classes 1 and 2)
EN 62053-23
2003
Electricity metering equipment (a.c) – Particular requirements Part 23: Static meters
for reactive energy (classes 2 and 3)
EN 61000-4-2
1995
Electrostatic discharge immunity test.
EN 61000-4-3
2006
2008
Radiated RF electromagnetic field immunity test.
EN 61000-4-4
2004
Electrical fast transient/burst immunity test.
EN 61000-4-5
2006
Surge immunity test.
EN 61000-4-6
2007
Immunity to RF conducted disturbances.
EN 61000-4-8
2010
Power frequency magnetic field immunity test.
EN 61000-4-11
2004
Voltage dips, short interruptions and voltage variations immunity tests.
EN 61000-6-3
2007
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards; Emission
standard for residential, commercial and light-industrial environments
EN 61000-3-2
2010
2011
2011
Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
EN 61000-3-3
2011
Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current ≤ 16 A per phase and not subject to
conditional connection
EN 55016-2-1
2009
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 2-1: Methods of measurement of disturbances and immunity - Conducted
disturbance measurements
EN 60068-2-2
2008
Environmental testing, Dry Heat
EN 60068-2-6
2007
Environmental testing, Vibration (sinusoidal)
EN 60068-2-30
2008
Environmental testing, Damp heat, cyclic (12 h + 12 h cycle)
EN 60068-2-31
2010
Environmental testing, Rough handling shocks, primarily for equipment-type
specimens
EN 60068-2-75
1997
Environmental testing, Hammer tests
BS EN 61010-1
2010
Safety requirements for electrical equipment for measurement, control and laboratory
use - Part 1: General requirements
EN 61010-2-030
2010
Safety requirements for electrical equipment for measurement, control, and laboratory
use - Part 2-030: Particular requirements for testing and measuring circuits
EN 62262
2010
Degrees of protection provided by enclosures for electrical equipment against
external mechanical impacts (IK code)
51