User's Manual

URC PLUS User’s Guide
Copyright 

 2009 Entone, Inc. All rights reserved .
13
V2.3 for URC Plus v3.8
3. Press “0” to set URC PLUS to IR mode only. The URC PLUS will not send any RF signal.
The “STB” button backlight on the URC PLUS will blink twice to indicate that the setting was successful.
Pressing a key other than “0”, “1”, “2”, “3” or a button is not pressed within 10 seconds, the “STB”
backlight will extinguish and the URC PLUS registration process will be terminated.
IR Reception Range
IR signals travel only short distances (40 feet or less), and cannot go through walls or other solid
objects. You must point the URC PLUS to the Amulet, with no objects blocking the line of sight.
Figure 3-4 IR Reception Range