User's Manual

URC PLUS User’s Guide



V2.3 for URC Plus v3.8

Showing Programmed Device Code

You can display the 4-digit device code by the following procedures:

1. Press “TV” to display the TV device code or “AUX” to display the AUX device code.

2. Press and hold “SETUP” for 5 seconds.

3. The “TV” or “AUX” backlight will illuminate.

4. Press “INFO” once.

5. The 4-digits device code will be displayed in the following manner.

a. The “TV”/”AUX” backlight blinks to indicate the digit. One blink indicates 1, 2 blinks indicates 2,

etc until 9 blinks indicates 9. A 0 is indicates by a shot, long, short, long, short, long blink.

b. In between each digit, the “TV”/”AUX” backlight will be off for 1 second.

c. For example, the following blink pattern shows a device code of 0123.

.-.-.- . .. ...