User`s guide

Amulet High Definition Television Receiver User’s Guide

SETTING HDMI AND COMPONENT OUTPUT RESOLUTION

You can use User Menu to set the HDMI and Component output resolution. To use User Menu to set the

outp

t resolution, follow procedures in section Using User Menu, to make the changes.

NOTE: Setting

of HDMI and component output resolution may be disabled in User Menu. You may need to

use the middleware user menu to set the resolution. Please refer to your service provider for details.

SETTING CLOSED CAPTIONING

You can use User Menu to control closed captioning.

To use User Menu to set closed captioning, follow procedures in section Using Us

er Menu, to make the

changes.

Please refer to section Clos

ed Captioning for details of controlling closed captioning.

NOTE: Settin

of closed captioning may be disabled in User Menu. You may need to use the middleware

user menu to control closed captioning. Please refer to your service provider for details.

SETTING URC IR KEYCODE

Amulet is equipped with an IR receiver at the front panel.

If you have TiVo or Sling box, you can use the IR

blaster provided by TiVo or Sling to control Amulet for actions such as channel switching for recording or

remote network viewing.

Amulet has implemented the following 4 IR keycodes. You can configure TiVo or Sling, and your Amulet to

use the same

keycode in order to complete the setup.

 MAGNAVOX 10224-B

 CENTURION 00092-B

 Toshiba TSR-202 (Satellite Receiver)

 Hitachi HDS-100R (Satellite/DTRV Receiver)

ollow procedures in section Usin

g User M

enu, to make your IR keycode selection in Amulet.

Please refer to the TiVo or Sling user’s manual for

confi

guration and setup of the TiVo and Sling box

keycode.

V1.9