User guide

Wi-Fi Connection

NOTE: You must have the wireless switch in the ON position for any wireless commu-

nications to work. The units ship from the factory with the switch in the OFF position. The

switch is located on the top of the unit. Slide it toward the SIM card slot.

NOTE: The enTourage eDGe is an 802.11B/G device. If your wireless router is an

802.11N router, make sure it is congured to work with a B/G device. See Wi-Fi Settings for

a list of the security types supported.

To set up a wireless connection for your enTourage eDGe:

1. Go to the

home screen.

2. On the home screen menu select the applications menu

on the

navigation bar. The applications menu opens. On the navigation bar at the bottom of the

screen, select the shortcut for Networking.

3. On the Wi-Fi settings page, choose Add Wi-Fi network. Enter the values for your

wireless network. Contact your wireless network administrator for details.

NOTE: You can have the enTourage eDGe automatically notify you when an open wire-

less connection is available. On the Wi-Fi settings page, make sure that Network notica-

tion is checked.

To connect to an existing WiFi Network:

1. Open the applications menu and select the Networking shortcut.

2. Select Wi-Fi settings.

3. Select the Wi-Fi network to connect.

4. Select the checkbox next to Wi-Fi to turn on the Wi-Fi connection.

To delete an existing Wi-Fi connection:

1. Select Settings on the home screen.

2. Select Wi-Fi settings.

3. Select the Wi-Fi network to delete.

4. Select Forget on the popup menu.

Return to Contents