User guide

41
Moving Files to the enTourage eDGe using the Mini-USB Connector
The mini-USB port is on the top of the e-reader side of the enTourage eDGe.
To copy les onto the enTourage eDGe:
1. Connect the enTourage eDGe to a PC, MAC, or Linux-based PC using the mini-USB cable.
2. Once the enTourage eDGe is connected to the PC, a USB icon appears in the notication bar at the top of the
touchscreen.
3. Press and hold the notication bar and drag it down as shown.
4. Select the USB connected message, then select Mount. Your computer should now recognize the enTourage
eDGe as a drive.
NOTE: While you are moving les from a PC to the enTourage eDGe, you will not be able to perform any other
functions involving the Library.
5. Select a le on your PC and move it to the eDGe/public folder.
6. Once you have moved the les, open the notications bar on the enTourage eDGe again by dragging down the
USB icon. Select the Turn off USB Storage message, then select Turn Off.
Return to Contents