Cut Sheet

106 Low Voltage Products & Systems

LV006 [1SXU160006C0202] - June 2007 ABB Inc. • 888-385-1221 • www.abb-control.com

Marking

Marking for terminal blocks

Selection table

Remove one of the side bands of the card.

Separate the chosen strip from the rest

of the card.

Press the ﬁrst marker in place, hold it and

slide your thomb on the rest of the strip.

Markers

for blocks : RC410 RC 510 RC610 RC810 RC1010 RC55 RC65 RCAL85

Screw/ADO

5 mm spacing

6 mm spacing

8 mm

spacing

10 mm spacing

12 mm spacing

16 mm spacing

Spring

4 mm spacing

5 mm spacing

6 mm spacing

8 mm

10 mm

12 mm

16 mm

Power

Possible mounting : Recommended mounting : Impossible mounting :

RC410 ... RC1010 Screw Spring ADO

RC55 , RC65 Screw Spring ADO

Horizontal marking

Vertical marking

PAGE 1
0 M g in k ar Marking Marking for terminal blocks Selection table Markers for blocks : RC410 RC 510 RC610 RC810 RC1010 RC55 RC65 RCAL85 Screw/ADO 1 Remove one of the side bands of the card. 5 mm spacing 6 mm spacing 8 mm spacing 10 mm spacing 12 mm spacing 2 Separate the chosen strip from the rest of the card. 16 mm spacing Spring 4 mm spacing 5 mm spacing 6 mm spacing 8 mm 3 Press the first marker in place, hold it and slide your thomb on the rest of the strip.
PAGE 2
10 Ma Marking rk Marking for terminal blocks in g Standard RC marker cards (x) = Nb of cards in 5 mm spacing kit (x) = Nb of cards in 5 mm spacing kit (x) = Nb of cards in 6 mm spacing kit (x) = Nb of cards in 6 mm spacing kit Marker sizes RC410 RC55 RC510 RC65 RC610 RC810 RC1010 Blank cards 0229 000.15 0230 000.12 0231 000.07 0232 000.00 0233 000.01 0234 000.02 0229 002.03 0229 003.04 0229 004.05 0229 005.06 0229 006.07 0229 007.00 0229 008.11 0230 002.00 (5) 0230 003.
PAGE 3
10 M g in k ar Marking Marking systems Marking table Marking system computer assisted. Description Marking table Type Complete plotter kit AMS 500 Kit includes: 1 Plotter, Model AMS500 1 Software on CD 1 Template for 8 RC/RCT marker cards 1 Plotter pen (.