Product Info
Table Of Contents
- SP_Info_Central.book
- SP Series Info Central
- What do you want to do?
- Answer questions you have about using the printer
- Learn how to use this online information
- Learn more about tasks, such as installation, setup, or maintenance
- Solve problems with printing
- Access an online version of the Printer Guide
- Open help for the Printer Toolbox and Messages
- Open help for Properties or Printing Preferences
- Safety and compliance (FCC)
- Acknowledgments
- SP Series Info Central
- SP_Install_e-guide.book
- Installation
- Before you install
- Install the printer
- Installing the driver
- Upgrading the driver
- Reinstalling the driver
- Troubleshooting Installation Problems
- PC port settings
- Connecting more than one printer or more than one PC
- On the CD-ROM
- Installation
- SP_Setup_e-guide.book
- Setting up for your card design
- How do I create a card design?
- What is a card design?
- When should I perform setup tasks?
- What do I use to set up the printer?
- Why are there several interfaces to set up the printer?
- Card design checklist
- Working with Properties and Printing Preferences
- Changing the type of print ribbon
- Set up for monochrome (K) printing
- Color settings
- Changing settings in the printer
- Magnetic Stripe Setup
- Smart card setup
- Setting up for your card design
- SP_Production_e-guide.book
- SP_Supplies_e-guide.book
- SP_Troubleshooting_e-guide.book
12
SP Series Info Central
Notice for Taiwan
Notice for Japan
This equipment is in the Class A category of information technology equipment based on the rules of the
Voluntary Control Council for Interference by Information Technology Equipment (VCCI). When used in a
residential area, radio interference may be caused. In this case, the user may be required to take
appropriate corrective actions.
Notice to Users of SP35 or SP55 Printers
The printer emits radio-frequency waves and must be used as installed and recommended by Datacard,
the printer manufacturer. You may not modify the printer or how it is used without the written permission of
Datacard. You may not operate the printer after modifying it or its method of operation.
Notice to Users of Printers Equipped with Contactless Smart Card Coupler
The contactless smart card coupler emits radio-frequency waves and must be used as installed and
recommended by Datacard, the printer manufacturer. You may not modify the coupler or how it is used
without the written permission of Datacard. You may not operate the printer after modifying the coupler or
its method of operation.
Liability statement
This Datacard® product has been built to the high standards of DataCard Corporation (doing business as
Datacard® Group). Please note and heed the WARNING and CAUTION labels that have been placed on
the equipment for your safety. Please do not attempt to operate or repair this equipment without adequate
training. Any use, operation or repair in contravention of this document is at your own risk. By acceptance
of this system you hereby assume all liability consequent to your use or misuse of this equipment.
DataCard Corporation assumes no liability for incidental, special or consequential damage of any kind.
Equipment specifications, applications and options are subject to change at the sole discretion of
DataCard Corporation without notice.
Safety
All Datacard® products are built to strict safety and reliability specifications in accordance with UL60950
and Canadian requirements, and the Low Voltage Directive 73/23/EEC. Therefore, safety issues pertaining
to operation and repair of Datacard® equipment are primarily environmental and human interface.
The following basic safety tips are given to ensure safe installation, operation and maintenance of
Datacard® equipment and are not to be considered as comprehensive on all matters of safety.