Product Info
Table Of Contents
- SP_Info_Central.book
- SP Series Info Central
- What do you want to do?
- Answer questions you have about using the printer
- Learn how to use this online information
- Learn more about tasks, such as installation, setup, or maintenance
- Solve problems with printing
- Access an online version of the Printer Guide
- Open help for the Printer Toolbox and Messages
- Open help for Properties or Printing Preferences
- Safety and compliance (FCC)
- Acknowledgments
- SP Series Info Central
- SP_Install_e-guide.book
- Installation
- Before you install
- Install the printer
- Installing the driver
- Upgrading the driver
- Reinstalling the driver
- Troubleshooting Installation Problems
- PC port settings
- Connecting more than one printer or more than one PC
- On the CD-ROM
- Installation
- SP_Setup_e-guide.book
- Setting up for your card design
- How do I create a card design?
- What is a card design?
- When should I perform setup tasks?
- What do I use to set up the printer?
- Why are there several interfaces to set up the printer?
- Card design checklist
- Working with Properties and Printing Preferences
- Changing the type of print ribbon
- Set up for monochrome (K) printing
- Color settings
- Changing settings in the printer
- Magnetic Stripe Setup
- Smart card setup
- Setting up for your card design
- SP_Production_e-guide.book
- SP_Supplies_e-guide.book
- SP_Troubleshooting_e-guide.book
14
SP Series Info Central
The bottom of the card is
partly printed.
The Trailing Edge setting is too
far from the edge of the card.
Change the Trailing Edge
setting.
If the problem persists, contact
your service provider.
The top of the card is partly
printed.
The Leading Edge setting is too
far from the edge of the card.
Change the Leading Edge
setting.
If the problem persists, contact
your service provider.
Printed images (photos) are
blurry.
The image capture system needs
adjustment.
The cards have a matte, not
glossy, surface.
The image needs sharpening.
See the information for the image
capture system.
Use cards with a glossy surface
to print sharp images.
Change the Sharpness setting
on the Color Settings tab of the
Printer Toolbox.
Printed cards, including text,
are blurry.
The rollers may be dirty.
The cards may have a very
slippery surface or they might
not meet specifications.
The printhead might be dirty.
Run a cleaning card and then
change the cleaning roller. Clean
the printer rollers.
Obtain and use a different supply
of cards.
Clean the printhead.
If the problem persists, contact
your service provider.
What you see Possible causes Solutions