Product Info
Table Of Contents
- SP_Info_Central.book
- SP Series Info Central
- What do you want to do?
- Answer questions you have about using the printer
- Learn how to use this online information
- Learn more about tasks, such as installation, setup, or maintenance
- Solve problems with printing
- Access an online version of the Printer Guide
- Open help for the Printer Toolbox and Messages
- Open help for Properties or Printing Preferences
- Safety and compliance (FCC)
- Acknowledgments
- SP Series Info Central
- SP_Install_e-guide.book
- Installation
- Before you install
- Install the printer
- Installing the driver
- Upgrading the driver
- Reinstalling the driver
- Troubleshooting Installation Problems
- PC port settings
- Connecting more than one printer or more than one PC
- On the CD-ROM
- Installation
- SP_Setup_e-guide.book
- Setting up for your card design
- How do I create a card design?
- What is a card design?
- When should I perform setup tasks?
- What do I use to set up the printer?
- Why are there several interfaces to set up the printer?
- Card design checklist
- Working with Properties and Printing Preferences
- Changing the type of print ribbon
- Set up for monochrome (K) printing
- Color settings
- Changing settings in the printer
- Magnetic Stripe Setup
- Smart card setup
- Setting up for your card design
- SP_Production_e-guide.book
- SP_Supplies_e-guide.book
- SP_Troubleshooting_e-guide.book
27
SP Series Info Central
If the PC has more than one serial port, make sure you view the settings for the serial port to which the
printer is attached.
4 Select the following settings:
5 When the settings are correct, click OK to save settings and close the dialog box.
Setting the serial port on Windows XP
1 From the Start menu, select Settings and then Control Panel.
2 From the Control Panel, select the System icon.
3 Select the Hardware tab, and then select the Device Manager button.
4 Press the "+" next to Ports and double click the Communications Port to open the Communications
Port Properties dialog box.
Setting Value
Baud rate 9600
Data bits 8
Parity None
Stop bits 1
Flow control None