User's Manual

Message 105: Magstripe data error
The printer could not verify the magnetic stripe data
written on the card. The printer encoded data on the card
but could not verify all of the data.
To print the card again:
3. 1. Insert a magnetic stripe card that matches the
printer settings.
2. Press the User button on the printer or click "Retry
the card" in the Message box.
Message 106: Magstripe data not found
The printer could not find magstripe written data on card.
To print the card again:
4. 1. Insert a magnetic stripe card that matches the
printer settings.
2. Position the card with the magnetic stripe down and
to the right side of the printer.
3. Press the User button on the printer or click "Retry
the card" in the Message box.
Hints & Tips
The printer needs to remain off due to
an internal problem.
Pressing either the Power button or
the User button will power off the
printer.
Hints & Tips
The card might not match printer
settings or the data sent.
Ask the Administrator to verify that
the card, the data, and the printer
settings match.
XPS Card Printer Guide
DRAFT
2/22
Datacard Confidential
Page 22
SHORT TERM CONFIDENTIAL