User's Manual

XPS Card Printer Installation and User Guide 109
• Black with two topcoat panels (KTT ribbon), 650 images per roll
The printer applies Black and two topcoat panels on the
same side of the card.
• Continuous black (K ribbon), up to 500 images per roll
• Continuous black (K ribbon), up to 1500 images per roll
• Continuous dark blue, up to 1500 images per roll
• Continuous gold, up to 1500 images per roll
• Continuous gold metallic, up to 1500 images per roll
• Continuous red, up to 1500 images per roll
• Continuous white, up to 1500 images per roll
• Continuous green, up to 1500 images per roll
• Continuous silver, up to 1500 images per roll
• Continuous silver metallic, up to 1500 images per roll
• Continuous scratch-off, up to 1500 images per roll
Print Ribbon Storage Guidelines
• Store print ribbon in the original package until you load it in the printer.
• Keep the original packaging closed.
• The print ribbon maintains its quality for about one year. For optimum card quality,
purchase and store quantities that can be used within one year.
• The print ribbon and card stock might require secure storage and tracking. Follow your
policy for storing and tracking the supplies used to make cards.
• Choose a location away from direct sunlight, with a temperature between 32° F and 77°
F (0° C and 25° C). A humidity range from 40% to 60% non-condensing is recommended.
• Supply rolls should be at room temperature when installed in the printer. If supplies are
stored in an environment that is cooler than the printer environment, allow supplies to
reach room temperature before using.
• If the printer will not be used for an extended period, remove supplies from the printer
and store them with new supplies.