User's Manual
Table Of Contents
- Revision Log
- How-Do I… Quick links to Frequently Asked Questions
- Contents
- Message 100: Request not supported
- Message 101: Job could not complete
- Message 102: Card not in position
- Message 103: Printer problem
- Message 104: Critical problem
- Message 105: Magstripe data error
- Message 106: Magstripe data not found
- Message 107: Magstripe read data error
- Message 108: Magstripe read no data
- Message 109: Print ribbon problem
- Message 110: Print ribbon out or missing
- Message 111: Card not picked
- Message 112: Card hopper empty
- Message 113: Close cover to continue
- Message 114: Cover opened during job
- Message 115: Wait for print temperature
- Message 116: Magstripe not available
- Message 117: Reader not available
- Message 118: Print ribbon type problem
- Message 119: Print ribbon not supported
- Message 120: User paused the printer
- Message 121: Print ribbon ID problem
- Message 122: Magnetic stripe format problem
- Message 123: Insert new card then continue
- Message 124: Insert same card then continue
- Message 500: The printer is not available. The card cannot print.
- Message 501: The printer connection was lost. Printing the card is canceled.
- Message 502: The card data is missing or is not usable. The card cannot print.
- Message 503: The magnetic stripe data is missing. The card cannot print.
- Message 505: Bonjour is not installed. Cannot connect to the printer.
- Message 506: A card is currently processing.
- /
- Card Design and Setup
- Printer Driver
- Updates, Upgrades, and More
- Removing a Printer from a Windows PC
- Troubleshooting
- Supplies and Parts
- How-To Topics
- How to Install a Large Output Hopper
- How to Install the 200-Card Input Hopper Option
- How to Adjust the Colors Printed
- How to View Card Counts using the Driver
- How to View Card Counts from the Printer LCD Menu
- How to Change a Card Design
- How to Run a Cleaning Card
- How to Clean the Printhead
- How to Set the Driver Network Port Value
- How to Encode Magnetic Stripe without Printing
- How to Change the LCD Backlight
- How to Get the Printer Network IP Address
- How to Get the Printer USB IP Address
- How to Load Cards
- How to Load Ribbon
- How to Open Printing Preferences
- How to Open the Printer Manager
- How to Open the Printer Properties
- How to Print Driver Sample Cards
- How to Print a Printer Test Card
- How to Print on Both Sides of the Card
- How to Print More Than One Copy of a Card
- How to Rotate the Card
- How to View Printer Status
- How to Find the Printer Serial Number
- How to Set Magnetic Stripe Coercivity
- How to Set the Print Area
- How to Set the Print Resolution
- How to Set Static IP Address Type
- How to Use Print Blocking Escapes
- How to Use Magnetic Stripe Escapes
- How to Use Magnetic Stripe Fonts
- How to View the Driver Version
- How to View Network Information
- Legal Notices
XPS Card Printer Installation and User Guide 112
Replacement Parts
The following replacement parts for use with the printer are available.
Printhead Cartridge
The printer has a replaceable printhead cartridge. The printhead is subject
to wear or damage and has a direct impact on print quality.
Do not touch the printing edge of the printhead in the printhead cartridge.
Clean the printhead following the steps in
How to Clean the Printhead.
Print Ribbon Cartridge
The ribbon cartridge holds the print ribbon and the replaceable cleaning
sleeve in the printer.
Cleaning Supplies
The print ribbon kit includes a cleaning card and a replaceable cleaning
sleeve. For best results, keep additional cleaning supplies on hand.
The following additional cleaning supplies are available:
• Packages of 5 Replaceable Cleaning Sleeves
• Packages of 10 Printer Cleaning Cards.
• A Cleaning Pen: Use the cleaning pen to clean the printhead and other internal parts of
the printer. A cleaning pen can be used eight times.
Cleaning Roller Spindle
The cleaning roller spindle holds the replaceable cleaning sleeve.
Large Output Hopper Option
The printer can use a large output hopper, which holds about 100
cards. The user can replace the small, standard hopper with the large
hopper without using tools.
Lock Option
The printer can be used with a cable lock. Obtain the lock from your dealer, because it includes
an added security plate.
Power Supply
The power supply is rated at 100-240 VAC, 50-60 Hz and uses up to 3
amps. It is self-adjusting within the rated input voltage.
200-Card Input Hopper
The 200-card input hopper kit includes the larger hopper with cover attached. The standard
hopper is easily removed and the 200-card hopper can be installed without using tools.