User's Manual
Table Of Contents
- Revision Log
- How-Do I… Quick links to Frequently Asked Questions
- Contents
- Message 100: Request not supported
- Message 101: Job could not complete
- Message 102: Card not in position
- Message 103: Printer problem
- Message 104: Critical problem
- Message 105: Magstripe data error
- Message 106: Magstripe data not found
- Message 107: Magstripe read data error
- Message 108: Magstripe read no data
- Message 109: Print ribbon problem
- Message 110: Print ribbon out or missing
- Message 111: Card not picked
- Message 112: Card hopper empty
- Message 113: Close cover to continue
- Message 114: Cover opened during job
- Message 115: Wait for print temperature
- Message 116: Magstripe not available
- Message 117: Reader not available
- Message 118: Print ribbon type problem
- Message 119: Print ribbon not supported
- Message 120: User paused the printer
- Message 121: Print ribbon ID problem
- Message 122: Magnetic stripe format problem
- Message 123: Insert new card then continue
- Message 124: Insert same card then continue
- Message 500: The printer is not available. The card cannot print.
- Message 501: The printer connection was lost. Printing the card is canceled.
- Message 502: The card data is missing or is not usable. The card cannot print.
- Message 503: The magnetic stripe data is missing. The card cannot print.
- Message 505: Bonjour is not installed. Cannot connect to the printer.
- Message 506: A card is currently processing.
- /
- Card Design and Setup
- Printer Driver
- Updates, Upgrades, and More
- Removing a Printer from a Windows PC
- Troubleshooting
- Supplies and Parts
- How-To Topics
- How to Install a Large Output Hopper
- How to Install the 200-Card Input Hopper Option
- How to Adjust the Colors Printed
- How to View Card Counts using the Driver
- How to View Card Counts from the Printer LCD Menu
- How to Change a Card Design
- How to Run a Cleaning Card
- How to Clean the Printhead
- How to Set the Driver Network Port Value
- How to Encode Magnetic Stripe without Printing
- How to Change the LCD Backlight
- How to Get the Printer Network IP Address
- How to Get the Printer USB IP Address
- How to Load Cards
- How to Load Ribbon
- How to Open Printing Preferences
- How to Open the Printer Manager
- How to Open the Printer Properties
- How to Print Driver Sample Cards
- How to Print a Printer Test Card
- How to Print on Both Sides of the Card
- How to Print More Than One Copy of a Card
- How to Rotate the Card
- How to View Printer Status
- How to Find the Printer Serial Number
- How to Set Magnetic Stripe Coercivity
- How to Set the Print Area
- How to Set the Print Resolution
- How to Set Static IP Address Type
- How to Use Print Blocking Escapes
- How to Use Magnetic Stripe Escapes
- How to Use Magnetic Stripe Fonts
- How to View the Driver Version
- How to View Network Information
- Legal Notices
XPS Card Printer Installation and User Guide 78
Card Design: Smart Card
• About Smart Card
•
Smart Card Requirements
•
Smart Card Codes on the Printer Label
About Smart Card
This section presents basic information about personalizing smart cards. Smart card processing
is different from other types of personalization, because the "smart card" step of
personalization is controlled by an application that is different from the rest of card
personalization.
Normally, smart card setup is provided by a value-added reseller or service provider.
Information about the smart card module installed and the type of cards to use can be
requested from your service provider or value-added reseller.
Requirements
The following items are required when personalizing smart cards:
• A direct local connection
between the printer and the PC.
• Smart card reader in the printer.
• A smart card cable for the smart
card port used. The illustration
shows the location of the smart
card connection on the printer.
• Card application that is
customized to work with the
printer and the smart card application (using the driver SDK or ID software application
with a smart card application manager)
• Smart cards that work with the reader in the printer
Smart Card Codes on the Printer Label
The configuration label includes codes to identify the type and model of smart card module
installed in the printer. The following table lists the codes used on the configuration label.
Code on Label Type of Smart Card Module
S1 Integrator
S2 SCM Dual Interface Reader
The S1 value on the configuration label indicates that the printer was ordered from the factory
with the basic smart card components installed. An integrator must install a contactless reader
supplied by others.
If the S2 value is included in the configuration code, the printer has shipped from the factory
with the basic components of an S1, plus the SCM Dual (Contact/Contactless) Interface installed.