User's Guide

CR805 Retransfer Card Printer User’s Guide 105
200: Laminator exit card problem
The card is not where it should be in the laminator.
1. Open the laminator.
2. Turn the knob to remove the card.
3. Close the laminator.
On the PC, click Retry, or click Cancel to cancel the card.
201: L1 supply problem
The L1 supply is not moving properly. To try another card:
1. Open the laminator and remove the L1 cartridge.
2. Reposition, repair, or replace the supply and advance the repaired area one full turn.
3. Replace the cartridge and close the laminator.
On the PC, click Retry, or click Cancel to cancel the card.
202: L1 supply out or missing
The laminator does not have usable supplies.
1. Open the laminator.
2. Replace the supply.
3. Close the laminator.
On the PC, click OK, or click Cancel to cancel the card.
203: L1 supply type problem
The laminator cannot use the supply installed.
Use supplies designed for this laminator.
On the PC, click Retry, or click Cancel to cancel the card.
204: L1 supply not supported
The laminator cannot use the supply installed.
Use supplies designed for this laminator.
On the PC, click Retry, or click Cancel to cancel the card.