User's Guide

CR805 Retransfer Card Printer User’s Guide 33
7. Close the cartridge door. This releases the card weight so that it is lowered on top of the
cards.
8. Rotate the lock bar back into position.
9. Slide the lock bar release button to the right to lock the lock bars into place.
10. Lock the multi-hopper.
Use the Multi-Hopper Exception Slide
Use the exception slide to insert a single card into the printer without unlocking the multi-hopper
or opening a hopper cartridge.
1. Pull the exception slide out from
the multi-hopper.
2. Insert the card into the exception
slide tray.
3. Push the exception slide back into
the multi-hopper.
The card is pulled into the printer to
complete the job.
 The diagrams inside the cartridge show how to
position the card weight and load cards. Do not
place the cards on top of the card weight.
 You do not need to remove the cartridge from
the multi-hopper.
Caution: The lock bars, lock bar release button, and the multi-hopper door lock all
must be in the lock position for the printer to operate. If any of the locks are left in
the unlock position, the printer issues an error. You must unlock and re-lock all locks
to clear the error and place the printer in Ready status.
Card Weight
Cards